Questo sito utilizza i cookies per consentirti la migliore navigazione. Il sito é impostato per consentire l'utilizzo di tutti i cookies. Se si continua a navigare sul presente sito, si accetta il nostro utilizzo dei cookies.

CERCA FORI 2.0 quarry equipment

Electronic quarry equipment to find the holes for cutting with diamond wire


The instrument allows to find the exact position of the
non-intersecting holes, so won't be necessary any more useless attempts.

Through the fitting of the probes into the non intersecting holes,
the instrument shows:

  • if the holes are long enough or are short;

  • if the hole is on the left/right, back/forth, above/under,
    as to the other.

  • the minimum distance between a hole and the other.

So, it is necessary to move the drill parallel to the hole for the distance
which appears on the instrument and to effect a new hole, knowing the
exact position.



IMG 1438  IMG 1439

 IMG 1440



IMG 1441
 IMG 1442 1

The instrument is complete of:

  • Watertight, digital, interactive, rechargeable suitcase with 7'' display;

  • Electronic battery charger 100-230 Volt e 50-60 Hz;

  • Big probe 42mm. diam with 50mt. cable and reel (receiver);

  • Small probe 14mm. diam with 100mt. cable and reel (transmitter);

  • Stainless steel adapter for big holes (for transmitter);

  • Nos. 20 aluminium extendable bars 2mt. e.o., to introduce the probes in the no-intersecting holes.


The main improved features of CERCA FORI 2.0, compared to Hole Finder MG78:



Cerca Fori 2.0

Hole Finder MG78

Maximum measurable distance

200 cmt. (with centimetre precision)

120 cmt.

Maximum measurable distance left-right

200 cmt.

140 cmt.

Measurement detection







7' digital interactive

distance indicator only

Method of use

interactive, expert or guided use


Suitcase containing the electronic circuit

renewed design, shockproof, watertight


International Protection with closed case



International Protection with opened case



Battery Charger

electronic 100-230 Volt and 50-60 Hz

220V, 50 Hz

Receiving probe*

diam. 42mm. with 50mt. cable

diam. 35mm. with 50mt. cable

Transmitting probe*

diam. 14mm. with 100mt. cable

diam. 14mm. with 100mt. cable


1 rechargeable battery

3 rechargeable batteries

User manual

multi-language interactive digital (ita, eng, esp)


Customization preset for resale

Start menu and Help menu


Working temperature

from -10 to +40 C°

from -10 to +40 C°

*The transmitting and receiving probes MG78 are compatible with the new version 2.0, though don't read the 3 dimensions,
but only the 2 measurements left/right and back/forth.


(The manufacturer reserves the right to modify the instrument and its features without prior notice.)